GEMÜ 488 Victoria

Motorized butterfly valve

  • Description
  • Features
  • Technical specifications

The GEMÜ 488 Victoria soft seated butterfly valve is motorized. Various metal or plastic on/off or control actuators are available. The butterfly valve is available in nominal sizes DN 25 to 600 and in standard installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions.

  • Low torques thanks to special disc contour
  • Improved sealing
  • Extensive applications using a variety of materials
  • Robust body coating comparable to ISO 12944-6 C5
  • Manual override
  • Wide choice of motorized actuator types
  • Min. 250 μm layer thickness body coating
  • Bubble tight sealing, in accordance with EN 12266-1/P12, leak rate A
  • Media temperature :-10 to 150 °C
  • Ambient temperature:-10 to 70 °C
  • Operating pressure :0 to 16 bar
  • Nominal sizes:DN 25 to 600
  • Body configurations:Lug | U section | Wafer
  • Connection standards:AS | ASME | BS | DIN | EN | ISO | JIS
  • Body materials:EN-GJS-400-15, SG iron material
  • Body coating:Epoxy
  • Liner materials:EPDM | FKM | NBR | SBR, abrasion resistant
  • Disc materials:1.4408, investment casting material | 1.4408, polished investment casting material | EN-GJS-400-15, SG iron material
  • Disc coating:EPDM | Epoxy | Halar® | Rilsan®
  • Supply voltage:100 - 120 V AC, 50/60 Hz | 12 - 24 V AC/DC | 220 - 240 V AC, 50/60 Hz | 380 - 480 V AC, 50/60 Hz
  • Operating time 90°:4 to 100 s
  • Protection class:IP 65, 66, 67, 68
  • Conformities:ACS | ATEX | Belgaqua | CSA | DNV GL | DVGW Drinking water | DVGW Gas | EAC | FDA | WRAS

Product video

Videotutorial: Modifying to an pneumatic NO NC actuator

03:32 min
122 Views
Online since 03.11.2021
More videos
GEMÜ butterfl y valves at the Trollmühle Waterworks - Uranium removal and partial deionization using Uranex® and Carix® procedures
Further applications

Product applications

GEMÜ butterfl y valves at the Trollmühle Waterworks - Uranium removal and partial deionization using Uranex® and Carix® procedures

Currently, the waterworks at the Trollmühle water supply authority in Windesheim near Bingen am Rhein supply approximately 43,000 people in 14,000 households with 2.2 million m³ drinking water per year. At peak times, this means a daily dispensing volume of up to 8500 m³. On the one hand, Krüger WABAG / VWS Deutschland GmbH implemented the URANEX® system, which is used to minimise the water‘s geologically caused uranium content by means of ion exchange. On the other hand, partial deionization by ion exchange is achieved using the CARIX® procedure.

Product news

More news
08.10.2018

Cast off for the GEMÜ 480 Victoria butterfly valve

The new DNV-GL certificate...
Find out more